Introducing the Baby Weavers Shuffle SP Isovix Car Seat. Suitable from 9 months to 4 years, or 9kgs to 18kgs. The seat comes with breathable and washable covers at 30°, from the base to the seat, the two sides, the back and the head support as well. As you can see, the seat does cover up with an inset which can be taken out at any stage, get the child to move in with the car seats. Now this is good, because as the child grows, the seat will then grow with them. Also the seat, it does have the five point integral harness. Now with this harness, this will keep the child in the car seat nice and securely. To get the child into the car seat, you have to loosen the harnesses off first. To do that, push this white button here, pulling the bottom strap of the harness. As you can see the harness has then been loosened. We do exactly the same on the other harness, just like so. We then unclip it from the buckle, and now as you can see, you can hear the bleeping noise. That bleeping noise just indicates that if the child is trying to unclip this red buckle here, it means they’re trying to escape from the car seat. Now to clip in the child back in, both clips go together. You then clip it into the buckle. You will find is you will hear that click telling you that it is clipped in nice and secure. Toward the harness nice and tight, you pull the top strap of the harness. As you can see, this has then been tightened, exactly the same on the other harness, just like so.
Now what I should do now is I shall you how to fit the seat. We fit the seat using this Isofix points. Now to extend them out, we do have this red lever at the front of the seat. We just pull that out, and the legs, they will then extend just like so. We then clip it into the Isofix points. We clip one side in and we clip the other side in. Now you will find it does go to green, telling you that it is then clipped into the Isofix. Now before we push this seat back towards your fearful car seat, we do have this extra piece of seatbelt here. Now this clips onto a third anchorage point in the back for your boot in your car. What it is called, is called a Top Tether Point. Now not all vehicles have this, to double check if you do have it in your car or not, please check your vehicle manual. Now this comes over the top of your vehicle headdress. It then clips on to the third anchorage points. What you then do, you push this seat back towards your vehicle car seat, pulling this red lever out, and then pushing the seat back. What you then do, pull this extra piece of seatbelt nice and tight. As you can see, it is then been tightened. Now this would be the car seat in the car nice and securely.
Another that this seat does have, it does have four reclined positions. And to recline the seat, squeeze in this black lever underneath the seat here, and the seat has then been further reclined. Now this is good, because if the child falls asleep in the car, you can always put the child in more comfort as you are travelling. Now that’s the Baby Weaver Shuffle SP Isofix Car Seat.
