Hi, I’m Ashley from Kiddiecare.com. So I’ll be showing you how to change the harness height in the Opus. Okay, this is the Opus. So remove it from the middle centre to the top centre. To do this, make life easier for yourself. Pull the headrest up and you remove and release the harness by pressing this still button underneath here. We’re going to pull the harness from the top down. Once you’ve done this, we’re then going to turn the seat around so we could expose this clasp. Once there, you then go undo the clasp or simply for the knees through the sides, clasp so, again doing both of them. Once there, tuck that down at the bottom. Turn the seat back around. And you’re then free to pull the harnesses free. Once there, you now pull your harness from underneath and line them up straight, so that you know there’s no twists.
Once there, now to the tricky part, so the easiest way to do this is to fold the harness in half. Pull it from behind and through the hole. This is tricky, because of the grips on the bottom. We’re going to get slip shell of the car seat. Again, then turning the seat around and do it exactly the same from this direction. Once there, then turn the seat around. Make sure there’s no twists. Place it through the higher setting, again folding in half. This is now harder than before, because you then have to pull from behind, pushing and pulling it at the same time, getting through. And then exactly the same behind, making sure there’s no twists in the seatbelt. Once you pull this through, and so to that fabric, you then adjust to the pads to the correct level.
Now what we’re going to do now is simply pass the harness back up through the patch out in the top, again make sure there’s no twists and then pass on top of your harness. Once you’ve got through the back, come for to do the second one. So again, exact and same procedure. Just pushing it up to the top, pulling it through, make sure there’s no twists, and again on top of the other harness. Once there, turn around and you’ll see that they both come through, so you then free, get the clasp, and then it’s just the case of pushing it into the hole, spite them in, and making sure it’s on the flap. So again, slide it through; make sure it’s in the flip. And that is how you adjust that and pull that tight. You see, it’s how to change the harness height. Thank you.
